The correct switch steps of Toshiba UV printer
Friends familiar with the XENONS equipment should know that the XENONS M series are all Toshiba industrial head.The whole series of UV printers are equipped with special head moisturizing trays. Today, we will give you a list of the switch machine steps of Toshiba UV printers for your reference.
First the open steps:
1.open the machine
2.Open the water-cycle system
3.Take off the moisturizing trays
4.When the temperature of the Sub-tank bottle stays at 45 degrees, the following indicator light is only in constant temperature and heating, and open the head negative pressure valve.When the temperature of printing head rises to 45 degrees, you can print now
5.Clean the printing head with ink
6.Open the air-suction system,print state diagram.
7.Normal work
Close steps:
1.close the air-suction system
2.Close water-cycle power
3.Close the machine power
4.Close the negative pressure valve of printing head
5.Install the moisturizing trays, then push the carriage to the feeding platform, and lower the carriage height and fix the moisture tray before the moisture tray is cushioned or turned off.
Above steps are for your reference.
For more professional advice, pay attention to the E-mail：sales@yilijet.com
Or call 400-027-8600
More details,please pay attention to http://www.xenons.cn
